root localhost smartctl -a -d ata dev sda smartctl version 38 i586-alt

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
[root@localhost ~]# smartctl -a -d ata /dev/sda
smartctl version 5.38 [i586-alt-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST3500320AS
Serial Number: 9QM90P1Z
Firmware Version: SD15
User Capacity: 500,107,862,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri May 29 21:33:09 2009 MSD
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 634) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 113) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 090 089 006 Pre-fail Always - 237149569
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 131
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1129
7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail Always - 48411532
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 3099
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 1
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 131
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 104
188 Unknown_Attribute 0x0032 100 099 000 Old_age Always - 21475164171
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 058 050 045 Old_age Always - 42 (Lifetime Min/Max 26/42)
194 Temperature_Celsius 0x0022 042 050 000 Old_age Always - 42 (0 14 0 0)
195 Hardware_ECC_Recovered 0x001a 041 025 000 Old_age Always - 237149569
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 3
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 3
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 105 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 105 occurred at disk power-on lifetime: 3050 hours (127 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 30 ff ff ff ef 00 1d+15:49:21.121 READ DMA EXT
27 00 00 00 00 00 e0 00 1d+15:49:21.121 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+15:49:21.118 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+15:49:21.115 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+15:49:21.098 READ NATIVE MAX ADDRESS EXT
Error 104 occurred at disk power-on lifetime: 3050 hours (127 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 30 ff ff ff ef 00 1d+15:49:18.173 READ DMA EXT
25 00 70 ff ff ff ef 00 1d+15:49:17.964 READ DMA EXT
25 00 90 ff ff ff ef 00 1d+15:49:17.753 READ DMA EXT
25 00 20 ff ff ff ef 00 1d+15:49:17.747 READ DMA EXT
25 00 10 ff ff ff ef 00 1d+15:49:17.737 READ DMA EXT
Error 103 occurred at disk power-on lifetime: 3050 hours (127 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 1d+15:21:09.678 READ DMA EXT
27 00 00 00 00 00 e0 00 1d+15:21:09.678 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+15:21:09.675 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+15:21:09.672 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+15:21:09.652 READ NATIVE MAX ADDRESS EXT
Error 102 occurred at disk power-on lifetime: 3050 hours (127 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 1d+15:21:06.713 READ DMA EXT
27 00 00 00 00 00 e0 00 1d+15:21:06.713 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+15:21:06.710 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+15:21:06.707 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+15:21:06.687 READ NATIVE MAX ADDRESS EXT
Error 101 occurred at disk power-on lifetime: 3050 hours (127 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 1d+15:21:03.698 READ DMA EXT
27 00 00 00 00 00 e0 00 1d+15:21:03.698 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+15:21:03.695 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+15:21:03.692 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+15:21:03.675 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 3 -
# 2 Short offline Completed without error 00% 1 -
# 3 Short offline Completed without error 00% 1 -
# 4 Short captive Interrupted (host reset) 70% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.