root localhost dmesg Linux version 18-std-smp-alt10 builder apiary arm

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
[root@localhost ~]# dmesg
Linux version 2.6.18-std-smp-alt10 (builder@apiary.armor.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt12)) #1 SMP Wed Dec 12 23:42:05 MSK 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001de90000 (usable)
BIOS-e820: 000000001de90000 - 000000001de9e000 (ACPI data)
BIOS-e820: 000000001de9e000 - 000000001df00000 (ACPI NVS)
BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
478MB LOWMEM available.
found SMP MP-table at 000f87f0
On node 0 totalpages: 122512
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 118416 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f87c0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1de99c1d
ACPI: FADT (v001 VN890 PTLTW 0x06040000 PTL_ 0x000f4240) @ 0x1de9def4
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1de9df68
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x1de9dfc4
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20050228) @ 0x1de9a18a
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0x1de99c55
ACPI: DSDT (v001 VIA PTL_ACPI 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
Detected 1729.008 MHz processor.
Built 1 zonelists. Total pages: 122512
Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=0f5d0dd7-d89f-49e2-aebe-03f77b7f71a5 resume=/dev/hda1 panic=30 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fecc0000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 481556k/490048k available (1590k kernel code, 7964k reserved, 639k data, 192k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3461.92 BogoMIPS (lpj=6923853)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000940 0000c109 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
checking if image is initramfs... it is
Freeing initrd memory: 557k freed
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
CPU0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 08
Total of 1 processors activated (3461.92 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE0C._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *0, disabled.
ACPI: Embedded Controller [EC0] (gpe 5) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:07: ioport range 0xfe10-0xfe11 has been reserved
pnp: 00:07: ioport range 0xfe00-0xfe00 has been reserved
PCI: Failed to allocate mem resource #6:10000@c0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: c9000000-c9ffffff
PREFETCH window: a0000000-bfffffff
PCI: Bridge: 0000:00:02.0
IO window: 5000-5fff
MEM window: c8400000-c85fffff
PREFETCH window: c8000000-c81fffff
PCI: Bridge: 0000:00:03.0
IO window: 6000-6fff
MEM window: c8600000-c86fffff
PREFETCH window: c8200000-c83fffff
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: c8700000-c87fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1234377421.452:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
Allocate Port Service[0000:00:02.0:pcie02]
Allocate Port Service[0000:00:02.0:pcie03]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
Allocate Port Service[0000:00:03.0:pcie02]
Allocate Port Service[0000:00:03.0:pcie03]
vesafb: framebuffer at 0xa0000000, mapped to 0xde880000, using 3750k, total 32768k
vesafb: mode is 800x600x16, linelength=1600, pages=31
vesafb: protected mode interface info at c000:8f86
vesafb: pmi: set display start = c00c8fd4, set palette = c00c9045
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107306 bytes,<6>...found (800x600, 8288 bytes, v3).
Console: switching to colour frame buffer device 97x34
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S3<6>Time: tsc clocksource has been installed.
S4 S5)
Freeing unused kernel memory: 192k freed
Executing init=/init
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 7
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0x4c50-0x4c57, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x4c58-0x4c5f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input0
hda: TOSHIBA MK8032GAX, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB), CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda4 < hda5 >
hdc: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 2.00 loaded.
sata_via 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 201
sata_via 0000:00:0f.0: routed to hard irq line 10
PCI: Setting latency timer of device 0000:00:0f.0 to 64
ata1: SATA max UDMA/133 cmd 0x4C70 ctl 0x4C66 bmdma 0x4C40 irq 201
ata2: SATA max UDMA/133 cmd 0x4C68 ctl 0x4C62 bmdma 0x4C48 irq 201
scsi0 : sata_via
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x4C77
scsi1 : sata_via
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x4C6F
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:10.4 to 64
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 201, io mem 0xc8a00000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:10.0 to 64
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 209, io base 0x00004c00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:10.1 to 64
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 217, io base 0x00004c20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: PC Speaker as /class/input/input1
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 201
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 201, io base 0x000010c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 225
eth0: VIA Rhine II at 0x14800, 00:40:d0:a0:81:fd, IRQ 225.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
usb 2-1: new low speed USB device using uhci_hcd and address 2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected VIA P4M890 chipset
agpgart: AGP aperture is 128M @ 0xc0000000
usb 2-1: configuration #1 chosen from 1 choice
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.8.4.2 (0.9.3.1)
ath_pci: 0.9.4.5 (0.9.3.1)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:02:00.0 to 64
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ath_rate_sample: 1.2 (0.9.3.1)
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 10.0 phy 6.1 radio 10.2
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
wifi0: Atheros 5424/2424: mem=0xc8500000, irq=233
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ts: Compaq touchscreen protocol output
usbcore: registered new driver hiddev
input: Genius Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:10.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 17 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:06:01.0 to 64
Adding 963860k swap on /dev/hda1. Priority:-1 extents:1 across:963860k
EXT3 FS on hda2, internal journal
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 17
eth0: link down
ACPI Exception (acpi_battery-0158): AE_SUPPORT, Extracting _BIF [20060707]
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Lid Switch [LID]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 16 throttling states)
ACPI Exception (acpi_processor-0678): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI Exception (acpi_processor-0678): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI Exception (acpi_processor-0678): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Thermal Zone [TZ0] (84 C)
Time: acpi_pm clocksource has been installed.
ACPI: AC Adapter [AC] (on-line)
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 1-3: configuration #1 chosen from 1 choice
usbcore: registered new driver libusual
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DT 101 II Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 2:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
sd 2:0:0:0: Attached scsi generic sg0 type 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
hda-intel: Invalid position buffer, using LPIB read method instead.
usb 1-3: USB disconnect, address 3
usb 1-3: new high speed USB device using ehci_hcd and address 4
usb 1-3: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DT 101 II Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 3:0:0:0: Attached scsi removable disk sda
sd 3:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 1-3: USB disconnect, address 4
usb 1-3: new high speed USB device using ehci_hcd and address 5
usb 1-3: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DT 101 II Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 4:0:0:0: Attached scsi removable disk sda
sd 4:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 1-3: USB disconnect, address 5
usb 1-3: new high speed USB device using ehci_hcd and address 6
usb 1-3: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DT 101 II Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 5:0:0:0: Attached scsi removable disk sda
sd 5:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 1-3: USB disconnect, address 6
usb 1-3: new high speed USB device using ehci_hcd and address 7
usb 1-3: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DT 101 II Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 6:0:0:0: Attached scsi removable disk sda
sd 6:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 1-3: USB disconnect, address 7
usb 1-3: new high speed USB device using ehci_hcd and address 8
usb 1-3: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DT 101 II Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 7:0:0:0: Attached scsi removable disk sda
sd 7:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 1-3: USB disconnect, address 8
usb 1-3: new high speed USB device using ehci_hcd and address 9
usb 1-3: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 9
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DT 101 II Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 15659008 512-byte hdwr sectors (8017 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 8:0:0:0: Attached scsi removable disk sda
sd 8:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 1-3: USB disconnect, address 9